Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

input-vlan-map
See the following sections:
input-vlan-map (Aggregated Ethernet)
• input-vlan-map (Aggregated Ethernet) on page 491
• input-vlan-map (Gigabit Ethernet IQ and 10-Gigabit Ethernet SFPP) on page 492
Syntax input-vlan-map {
(pop | push | swap);
tag-protocol-id tpid;
vlan-id number;
}
Hierarchy Level [edit interfaces interface-name unit logical-unit-number],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number]
Release Information Statement introduced in Junos OS Release 8.2.
Description For aggregated Ethernet interfaces using Gigabit Ethernet IQ and 10-Gigabit Ethernet
Required Privilege
Level
Related
Documentation
Copyright © 2012, Juniper Networks, Inc.
IQ2 and IQ2-E interfaces only, define the rewrite profile to be applied to incoming frames
on this logical interface.
The statements are explained separately.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
• Stacking a VLAN Tag on page 138
• output-vlan-map (Aggregated Ethernet)
Chapter 34: Summary of Ethernet Interfaces Configuration Statements
491