Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

Junos ®
OS 12.3 Ethernet Interfaces Configuration Guide
loopback (Aggregated Ethernet, Fast Ethernet, and Gigabit Ethernet)
Syntax (loopback | no-loopback);
Hierarchy Level [edit interfaces interface-name aggregated-ether-options],
[edit interfaces interface-name ether-options],
[edit interfaces interface-name fastether-options],
[edit interfaces interface-name gigether-options],
[edit interfaces interface-range name ether-options]
Release Information Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 12.2 for ACX Series Universal Access Routers.
Description For aggregated Ethernet, Fast Ethernet, Gigabit Ethernet, and 10-Gigabit Ethernet
Required Privilege
Level
Related
Documentation
loss-priority
506
interfaces, enable or disable loopback mode.
NOTE: By default, local aggregated Ethernet, Fast Ethernet, Tri-Rate Ethernet
copper, Gigabit Ethernet, and 10-Gigabit Ethernet interfaces connect to a
remote system.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
• Configuring Ethernet Loopback Capability on page 45
Syntax loss-priority (high | low);
Hierarchy Level [edit interfaces interface-name gigether-options ethernet-switch-profile
ethernet-policer-profile output-priority-map classifier premium forwarding-class
class-name]
Release Information Statement introduced before Junos OS Release 7.4.
Description Specify the packet loss priority value.
Required Privilege
Options high—Packet has high loss priority.
Level
Related
Documentation
low—Packet has low loss priority.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
• Specifying an Output Priority Map on page 319
Copyright © 2012, Juniper Networks, Inc.