Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

Description For Ethernet interfaces on M320, M120, MX Series, and T Series routers and PTX Series
Required Privilege
Level
Related
Documentation
optics-options
Packet Transport Switches, provide IEEE 802.3ah Operation, Administration, and
Maitenance (OAM) support.
The remaining statements are explained separately.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
• IEEE 802.3ah OAM Link-Fault Management Overview on page 291
• Configuring Ethernet 802.1ag OAM on PTX Series Packet Transport Switches on page 389
Syntax optics-options {
alarm low–light–alarm {
(link-down | syslog);
}
warning low–light–warning {
(link-down | syslog);
}
wavelength nm;
}
Hierarchy Level [edit interfaces interface-name]
Release Information Statement introduced before Junos OS Release 7.4.
alarm option and warning options introduced in Junos OS Release 10.0.
Statement introduced in Junos OS Release 12.1 for EX Series switches.
Description For 10-Gigabit Ethernet dense wavelength-division multiplexing (DWDM) interfaces only,
Required Privilege
configure full C-band International Telecommunication Union (ITU)-Grid tunable optics.
Options The remaining statements are explained separately.
Level
Related
Documentation
Copyright © 2012, Juniper Networks, Inc.
interface—To view this statement in the configuration.
Chapter 34: Summary of Ethernet Interfaces Configuration Statements
interface-control—To add this statement to the configuration.
• 10-Gigabit Ethernet DWDM Interface Wavelength Overview on page 353
519