Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

Related
Documentation
Copyright © 2012, Juniper Networks, Inc.
•
maintenance-domain vpws-service-1 {
name-format none;
level 5;
maintenance-association W {
short-name-format character-string;
protect-maintenance-association P {
aps-profile aps-profile-1;
}
continuity-check {
interval 1s;
}
mep 1 {
interface ge-1/3/5.0 working;
direction down;
auto-discovery;
}
}
maintenance-association P {
short-name-format character-string;
continuity-check {
interval 1s;
}
mep 1 {
interface ge-1/3/5.0 protect;
direction down;
auto-discovery;
}
}
}
}
}
}
connectivity-fault-management
• IEEE 802.1ag OAM Connectivity Fault Management Overview on page 181
• Creating the Maintenance Domain on page 184
• Configuring Maintenance Intermediate Points on page 185
• Creating a Maintenance Association on page 187
• Continuity Check Protocol on page 188
Chapter 13: Configuring IEEE 802.1ag OAM Connectivity-Fault Management
• Configuring a Connectivity Fault Management Action Profile on page 196
• Configuring Linktrace Protocol in CFM on page 199
• Configuring Ethernet Local Management Interface on page 200
• Configuring Port Status TLV and Interface Status TLV on page 208
• Configuring MAC Flush Message Processing in CET Mode on page 220
• Configuring M120 and MX Series Routers for CCC Encapsulated Packets on page 223
• Configuring Rate Limiting of Ethernet OAM Messages on page 225
• Configuring 802.1ag Ethernet OAM for VPLS on page 228
195