Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

Junos ®
OS 12.3 Ethernet Interfaces Configuration Guide
inner-vlan-id-range
Syntax inner-vlan-id-range start start-id end end-id;
Hierarchy Level [edit interfaces interface-name unit logical-unit-number],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number],
Release Information Statement introduced in Junos OS Release 9.0.
Description The range of VLAN IDs to be used in the ATM-to-Ethernet interworking cross-connect.
Required Privilege
Specify the starting VLAN ID and ending VLAN ID.
Options start-id—The lowest VLAN ID to be used.
Level
Related
Documentation
input-priority-map
490
end-id—The highest VLAN ID to be used.
Range: 32 through 4094
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
• Configuring ATM-to-Ethernet Interworking
Syntax input-priority-map {
ieee802.1p premium [ values ];
}
Hierarchy Level [edit interfaces interface-name gigether-options ethernet-switch-profile
ethernet-policer-profile]
Release Information Statement introduced before Junos OS Release 7.4.
Description For Gigabit Ethernet IQ and 10-Gigabit Ethernet interfaces only, define the input policer
Required Privilege
Level
Related
Documentation
priority map to be applied to incoming frames on this interface.
The statements are explained separately.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
• Specifying an Input Priority Map on page 318
• output-priority-map on page 520
Copyright © 2012, Juniper Networks, Inc.