Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

tag-protocol-id (TPID to Rewrite)
Syntax tag-protocol-id tpid;
Hierarchy Level [edit interfaces interface-name unit logical-unit-number input-vlan-map],
[edit interfaces interface-name unit logical-unit-number output-vlan-map],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
input-vlan-map],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
output-vlan-map]
Release Information Statement introduced before Junos OS Release 7.4.
Description For Gigabit Ethernet IQ and 10-Gigabit Ethernet IQ2 and IQ2-E interfaces only, configure
Required Privilege
the outer TPID value. All TPIDs you include in input and output VLAN maps must be
among those you specify at the [edit interfaces interface-name gigether-options
ethernet-switch-profile tag-protocol-id [ tpids ]] hierarchy level.
For 10-Gigabit Ethernet LAN/WAN PIC interfaces on T Series routers, value the default
TPID value (0x8100) is supported.
Default If the tag-protocol-id statement is not configured, the TPID value is 0x8100.
Level
Related
Documentation
Copyright © 2012, Juniper Networks, Inc.
interface—To view this statement in the configuration.
Chapter 34: Summary of Ethernet Interfaces Configuration Statements
interface-control—To add this statement to the configuration.
• Configuring Inner and Outer TPIDs and VLAN IDs on page 135
561