Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

Related
Documentation
Copyright © 2012, Juniper Networks, Inc.
the mac-learn-enable statement at the [edit interfaces interface-name gigether-options
ethernet-switch-profile] hierarchy level:
[edit interfaces interface-name gigether-options ethernet-switch-profile]
mac-learn-enable;
To prohibit the interface from dynamically learning source and destination MAC addresses,
include the no-mac-learn-enable statement at the [edit interfaces interface-name
gigether-options ethernet-switch-profile] hierarchy level:
[edit interfaces interface-name gigether-options ethernet-switch-profile]
no-mac-learn-enable;
MAC address learning is based on source addresses. You can start accounting for traffic
after it has been sent from the MAC address. Once the MAC address is learned, the frames
and bytes transmitted to or received from the MAC address can be tracked.
NOTE: DPCs and MPCs support MAC address accounting. DPCs support both
source and destination MAC address accounting. MPCs support only source
MAC address accounting.
• Gigabit Ethernet Accounting and Policing Overview on page 315
• Configuring Gigabit Ethernet Policers on page 317
• Configuring Gigabit Ethernet Two-Color and Tricolor Policers on page 323
• Configuring a Policer Overhead
• Junos® OS Ethernet Interfaces
Chapter 18: Configuring Gigabit Ethernet Accounting and Policing
327