Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

Related
Documentation
In this example, ge-0/0/0.0 is an ICL interface.
• The multichassis-lag-replicate-state statement options should be configured under
•
the multicast-snooping-options statement for that bridge domain.
NOTE: Snooping with active-active MC-LAG is only supported in non-proxy
mode.
Active-Active Bridging and VRRP over IRB Functionality on MX Series Routers Overview
on page 89
• Configuring Multichassis Link Aggregation on page 87
• mc-ae
• multi-chassis-protection
• peer
• show interfaces irb
• show interfaces mc-ae
• Junos® OS Ethernet Interfaces
IGMP Snooping in MC-LAG Active-Active on MX Series Routers Overview
Copyright © 2012, Juniper Networks, Inc.
• IGMP Snooping in MC-LAG Active-Active on MX Series Routers Functionality on page 104
• Typically Supported Network Topology for IGMP Snooping with MC-LAG Active-Active
Bridging on page 105
• Control Plane State Updates Triggered by Packets Received on Remote
Chassis on page 105
• Data Forwarding on page 106
• Pure Layer 2 Topology Without Integrated Routing and Bridging on page 107
• Qualified Learning on page 107
• Data Forwarding with Qualified Learning on page 108
• Static Groups on Single Homed Interfaces on page 108
• Router Facing Interfaces as Multichassis Links on page 108
Chapter 4: Configuring Aggregated Ethernet Interfaces
103