Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

pado-advertise
Syntax pado-advertise;
Hierarchy Level [edit protocols pppoe]
Release Information Statement introduced in Junos OS Release 10.2.
Description Enable named services configured in PPPoE service name tables to be advertised in
Required Privilege
Level
Related
Documentation
pdu-interval
PPPoE Active Discovery Offer (PADO) control packets. By default, advertisement of
named services in PADO packets is disabled.
NOTE: If you enable advertisement of named services in PADO packets,
make sure the number and length of of all advertised service entries does
not exceed the maximum transmission unit (MTU) size of the PPPoE
underlying interface.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
• Configuring PPPoE Service Name Tables on page 412
• Enabling Advertisement of Named Services in PADO Control Packets on page 420
Syntax pdu-interval interval;
Hierarchy Level [edit protocols oam ethernet link-fault-management interface interface-name]
Release Information Statement introduced in Junos OS Release 8.2.
Description For Ethernet interfaces on M320, M120, MX Series, and T Series routers, specify the
Required Privilege
periodic OAM PDU sending interval for fault detection. Used for IEEE 802.3ah Operation,
Administration, and Management (OAM) support.
Options interval—Periodic OAM PDU sending interval.
Level
Related
Documentation
Copyright © 2012, Juniper Networks, Inc.
Range: 100 through 1000 milliseconds
Default: 1000 milliseconds
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
• Configuring the OAM PDU Interval on page 295
Chapter 34: Summary of Ethernet Interfaces Configuration Statements
521