Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

Copyright © 2012, Juniper Networks, Inc.
maintenance-domain identifier {
level number;
maintenance-association identifier {
continuity-check {
convey-loss-threshold;
interval number;
loss-threshold number;
hold-interval number;
}
}
}
}
}
}
}
The Junos OS saves the last received loss threshold TLV from the remote MEP. You can
display the last saved loss threshold TLV that is received by the remote MEP, using the
show oam ethernet connectivity-fault-management mep-database maintenance-domain
identifier maintenance-association identifier local-mep identifier remote-mep identifier
command, as in the following example:
Chapter 13: Configuring IEEE 802.1ag OAM Connectivity-Fault Management
user@host> show oam ethernet connectivity-fault-management mep-database
maintenance-domain md3 maintenance-association ma5 local-mep 2 remote-mep 1
Maintenance domain name: md3, Format: string, Level: 3
Maintenance association name: ma3, Format: string
Continuity-check status: enabled, Interval: 1s, Loss-threshold: 3 frames
MEP identifier: 2, Direction: up, MAC address: 00:19:e2:b0:76:be
Auto-discovery: enabled, Priority: 0
Interface status TLV: none, Port status TLV: none
Connection Protection TLV: yes
Prefer me: no, Protection in use: no, FRR Flag: no
Interface name: xe-4/1/1.0, Interface status: Active, Link status: Up
Loss Threshold TLV:
Loss Threshold: 3 , Flag: 0x0
Remote MEP identifier: 1, State: ok
MAC address: 00:1f:12:b7:ce:79, Type: Learned
Interface: xe-4/1/1.0
Last flapped: Never
Continuity: 100%, Admin-enable duration: 45sec, Oper-down duration: 0sec
Effective loss threshold: 3 frames
Remote defect indication: false
Port status TLV: none
Interface status TLV: none
Connection Protection TLV:
Prefer me: no, Protection in use: no, FRR Flag: no
Loss Threshold TLV: #Displays last received value
Loss Threshold: 3 , Flag: 0x0
The Junos OS saves the last transmitted loss threshold TLV from a local MEP. You can
display the last transmitted loss threshold TLV and the effective loss (operational)
threshold for the remote MEP, using the show oam ethernet connectivity-fault-management
mep-database maintenance-domain identifier maintenance-association identifier local-mep
identifier remote-mep identifier command, as in the following example:
user@host> show oam ethernet connectivity-fault-management mep-database
maintenance-domain md3 maintenance-association ma5 local-mep 2 remote-mep 1
231