Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

Related
Documentation
The multicast in/out statistics can be obtained via interfaces statistics query through
CLI and via MIB objects through SNMP query.
To configure multicast statistics:
1. Include the multicast-statistics statement at the [edit interfaces interface-name]
hierarchy level.
An example of a multicast statistics configuration for an aggregated Ethernet interface
follows:
[edit interfaces]
ae0 {
multicast-statistics;
}
To display multicast statistics, use the show interfaces interface-name statistics detail
command.
•
multicast-statistics
• Configuring Multicast Statistics Collection on Ethernet Interfaces on page 51
• Junos® OS Ethernet Interfaces
Configuring Scheduler on Aggregated Ethernet Interfaces Without Link Protection
On aggregated Ethernet interfaces, you can configure scheduler in non–link-protect
mode on the following platforms:
• MX-Series
Copyright © 2012, Juniper Networks, Inc.
• M120 and M320 with IQ2 PIC
• T-series platforms (T620 and T320) with IQ2 PIC
The scheduler functions supported are:
• Per unit scheduler
• Hierarchical scheduler
• Shaping at the physical interface
To configure the hierarchical scheduler on aggregated Ethernet interfaces in the non
link-protect mode, include the hierarchical-scheduler statement at the [edit interfaces
aeX] hierarchy level:
[edit interfaces aeX hierarchical-scheduler]
Chapter 4: Configuring Aggregated Ethernet Interfaces
Prior to Junos OS Release 9.6, the hierarchical scheduler mode on these models required
the aggregated-ether-options statement link-protection option. If a link-protection option
is not specified, the scheduler is configured in non-link-protect mode.
To specify the member link bandwidth derivation based on the equal division model
(scale) or the replication model (replicate) on aggregated Ethernet interfaces, include
123