Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

Junos ®
OS 12.3 Ethernet Interfaces Configuration Guide
434
protocols {
protection-group {
ethernet-aps {
profile-1 {
protocol g8031;
hold-time 1000s;
revert-time 5m;
}
}
}
2. Configure the connectivity fault management.
ethernet {
oam {
connectivity-fault-management {
maintenance-domain md1 {
level 5;
3. Configure the continuity check message for the working path.
maintenance-association W {
protect maintenance-association P {
aps-profile profile-1;
}
continuity-check {
interval 1s;
}
mep 100 {
interface ge-1/0/0.0 working;
direction down;
auto-discovery;
}
}
4. Configure the continuity check message for the protection path.
maintenance-association P {
continuity-check {
interval 1s;
}
mep 100 {
interface ge-1/0/0.0 protect;
direction down;
auto-discovery;
}
}
Results Check the results of the configuration:
protocols {
protection-group {
ethernet-aps {
profile-1 {
protocol g8031;
hold-time 1000s;
revert-time 5m;
}
Copyright © 2012, Juniper Networks, Inc.