Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

Required Privilege
Level
Related
Documentation
west-interface
• 1563.86—1563.86 nm, corresponds to 50 GHz through 100 GHz
• Default: 1550.12—1550.12 nm, corresponds to 50 GHz through 100 GHz
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
• 10-Gigabit Ethernet DWDM Interface Wavelength Overview on page 353
Syntax west-interface {
node-id mac-address;
control-channel channel-name {
interface-none
ring-protection-link-end;
}
Hierarchy Level [edit protocols protection-group ethernet-ring ring-name]
Release Information Statement introduced in Junos OS Release 9.5.
Statement introduced in Junos OS Release 12.1 for EX Series switches.
Description Define one of the two interface ports for Ethernet ring protection, the other being defined
Required Privilege
Level
Related
Documentation
Copyright © 2012, Juniper Networks, Inc.
by the east-interface statement at the same hierarchy level. The interface must use the
control channel's logical interface name. The control channel is a dedicated VLAN channel
for the ring port.
NOTE: Always configure this port second, after configuring the east-interface
statement.
The statements are explained separately.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
• Ethernet Ring Protection Switching Overview on page 437
• Ethernet Ring Protection Using Ring Instances for Load Balancing
• east-interface
• ethernet-ring on page 475
Chapter 34: Summary of Ethernet Interfaces Configuration Statements
• Example: Configuring Ethernet Ring Protection Switching on EX Series Switches
• Configuring Ethernet Ring Protection Switching (CLI Procedure)
595