Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

max-sessions-vsa-ignore (Static and Dynamic Subscribers)
Syntax max-sessions-vsa-ignore;
Hierarchy Level [edit dynamic-profiles profile-name interfaces demux0 unit logical-unit-number family
pppoe],
[edit dynamic-profiles profile-name interfaces interface-name unit logical-unit-number family
pppoe],
[edit dynamic-profiles profile-name interfaces interface-name unit logical-unit-number
pppoe-underlying-options],
[edit interfaces interface-name unit logical-unit-number family pppoe],
[edit interfaces interface-name unit logical-unit-number pppoe-underlying-options],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
family pppoe],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
pppoe-underlying-options]
Release Information Statement introduced in Junos OS Release 11.4.
Description Configure the router to ignore (clear) the value returned by RADIUS in the
Required Privilege
Max-Clients-Per-Interface Juniper Networks vendor-specific attribute (VSA) [26-143],
and restore the PPPoE maximum session value on the underlying interface to the value
configured in the CLI with the max-sessions statement. The PPPoE maximum session
value specifies the maximum number of concurrent static or dynamic PPPoE logical
interfaces (sessions) that the router can activate on the PPPoE underlying interface, or
the maximum number of active static or dynamic PPPoE sessions that the router can
establish with a particular service entry in a PPPoE service name table.
Default If you do not include the max-sessions-vsa-ignore statement, the maximum session value
Level
Related
Documentation
Copyright © 2012, Juniper Networks, Inc.
returned by RADIUS in the Max-Clients-Per-Interface VSA takes precedence over the
PPPoE maximum session value configured with the max-sessions statement.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
• Limiting the Maximum Number of PPPoE Sessions on the Underlying Interface
• PPPoE Maximum Session Limit Overview
• Guidelines for Using PPPoE Maximum Session Limit from RADIUS
• Juniper Networks VSAs Supported by the AAA Service Framework
• For information about configuring dynamic PPPoE subscriber interfaces, see the Junos
OS Subscriber Management, Release 12.3
• For information about configuring static PPPoE interfaces, see the Junos® OS Ethernet
Interfaces
Chapter 34: Summary of Ethernet Interfaces Configuration Statements
509