21.03.2013 Views

Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Junos ®<br />

<strong>OS</strong> 12.3 <strong>Ethernet</strong> <strong>Interfaces</strong> <strong>Configuration</strong> Guide<br />

Related<br />

Documentation<br />

All TPIDs you include in input and output VLAN maps must be among those you specify<br />

at the [edit interfaces interface-name gigether-options ethernet-switch-profile<br />

tag-protocol-id [ tpids ]] or [edit interfaces interface-name aggregated-ether-options<br />

ethernet-switch-profile tag-protocol-id [ tpids ]] hierarchy level.<br />

•<br />

Stacking and Rewriting Gigabit <strong>Ethernet</strong> VLAN Tags Overview on page 129<br />

• aggregated-ether-options on page 463<br />

• ethernet-switch-profile on page 476<br />

• gigether-options on page 484<br />

• tag-protocol-id on page 560<br />

• <strong>Junos®</strong> <strong>OS</strong> <strong>Ethernet</strong> <strong>Interfaces</strong><br />

Configuring Stacked VLAN Tagging<br />

Related<br />

Documentation<br />

To configure stacked VLAN tagging for all logical interfaces on a physical interface,<br />

include the stacked-vlan-tagging statement at the [edit interfaces interface-name]<br />

hierarchy level:<br />

Configuring Dual VLAN Tags<br />

134<br />

[edit interfaces interface-name]<br />

stacked-vlan-tagging;<br />

If you include the stacked-vlan-tagging statement in the configuration, you must configure<br />

dual VLAN tags for all logical interfaces on the physical interface. For more information,<br />

see “Stacking a VLAN Tag” on page 138.<br />

•<br />

stacked-vlan-tagging<br />

• Stacking a VLAN Tag on page 138<br />

• <strong>Junos®</strong> <strong>OS</strong> <strong>Ethernet</strong> <strong>Interfaces</strong><br />

To configure dual VLAN tags on a logical interface, include the vlan-tags statement:<br />

vlan-tags inner vlan-id outer vlan-id;<br />

You can include this statement at the following hierarchy levels:<br />

• [edit interfaces interface-name unit logical-unit-number]<br />

• [edit logical-systems logical-system-name interfaces interface-name unit<br />

logical-unit-number]<br />

The outer tag VLAN ID range is from 1 through 511 for normal interfaces, and from 512<br />

through 4094 for VLAN CCC or VLAN VPLS interfaces. The inner tag is not restricted.<br />

You must also include the stacked-vlan-tagging statement in the configuration. See<br />

“Examples: Stacking and Rewriting Gigabit <strong>Ethernet</strong> IQ VLAN Tags” on page 147.<br />

Copyright © 2012, <strong>Juniper</strong> <strong>Networks</strong>, Inc.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!