Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

Copyright © 2012, Juniper Networks, Inc.
2. At router MX-PE2, configure MEP 101 as a CFM maintenance association endpoint in
CFM maintenance domain md6 as follows:
a. Define the maintenance domain md6 by associating it with maintenance domain
level 6 and maintenance association identifier ma6.
b. Configure the maintenance association by specifying continuity protocol options
and specifying MEP identifier 101.
c. Configure MEP 101 by attaching it to logical interface ge-0/2/5.0, which is a
single-tag interface on VLAN 512.
The following configuration is only a partial example of a complete and functional
configuration for router MX-PE2:
[edit]
interfaces { # Configure a single-tag logical interface on VLAN 512
ge-0/2/5 {
vlan-tagging;
unit 0 {
vlan-id 512;
}
}
}
protocols {
oam {
ethernet {
connectivity-fault-management {
traceoptions {
file eoam_cfm.log size 1g files 2 world-readable;
flag all;
}
maintenance-domain md6 { # Define MD ’md6’ on router MX-PE2
level 6;
maintenance-association ma6 { # Configure MA ’ma6’ on router MX-PE2
continuity-check {
interval 100ms;
hold-interval 1;
}
mep 101 { # Configure MEP 101 on router MX-PE2
interface ge–0/2/5.0; # Attach to logical interface on VLAN 512
direction down;
auto-discovery;
}
}
}
}
}
}
3. (Optional) To increase the accuracy of the ETH-DM statistics, modify the configuration
of router MX-PE1, which contains the receiver MEP, by enabling hardware-assisted
timestamping of 1DM frames received on the router.
[edit protocols]
oam {
Chapter 14: Configuring ITU-T Y.1731 Ethernet Service OAM
279