21.03.2013 Views

Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

Junos® OS Ethernet Interfaces Configuration ... - Juniper Networks

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Related<br />

Documentation<br />

Dynamically configuring VLANs or stacked VLANs requires the following general steps:<br />

1. Configure a dynamic profile for dynamic VLAN or dynamic stacked VLAN creation.<br />

2. Associate the VLAN or stacked VLAN dynamic profile with the interface.<br />

3. Specify the <strong>Ethernet</strong> packet type that the VLAN dynamic profile accepts.<br />

4. Define VLAN ranges for use by the dynamic profile when creating VLAN IDs.<br />

For procedures on how to configure dynamic VLANs and dynamic stacked VLANs for<br />

client access, see the Junos <strong>OS</strong> Subscriber Management, Release 12.3.<br />

•<br />

802.1Q VLANs Overview on page 53<br />

• <strong>Junos®</strong> <strong>OS</strong> <strong>Ethernet</strong> <strong>Interfaces</strong><br />

802.1Q VLAN IDs and <strong>Ethernet</strong> Interface Types<br />

You can partition the router into up to 4095 different VLANs—depending on the router<br />

model and the physical interface types—by associating logical interfaces with specific<br />

VLAN IDs.<br />

VLAN ID 0 is reserved for tagging the priority of frames. VLAN IDs 1 through 511 are reserved<br />

for normal VLANs. VLAN IDs 512 and above are reserved for VLAN circuit cross-connect<br />

(CCCs).<br />

Copyright © 2012, <strong>Juniper</strong> <strong>Networks</strong>, Inc.<br />

For Gigabit <strong>Ethernet</strong> IQ interfaces and Gigabit <strong>Ethernet</strong> PICs with SFPs (except the 10-port<br />

Gigabit <strong>Ethernet</strong> PIC and the built-in Gigabit <strong>Ethernet</strong> port on the M7i router), you can<br />

configure flexible <strong>Ethernet</strong> services encapsulation on the physical interface. With flexible<br />

<strong>Ethernet</strong> services encapsulation, VLAN IDs from 1 through 511 are no longer reserved for<br />

normal VLANs.<br />

The maximum number of user-configurable VLANs is 15 on each port of the Dense-FE<br />

PIC (8-port/12-port/48-port).<br />

Table 3 on page 55 lists VLAN ID range by interface type.<br />

Table 3: VLAN ID Range by Interface Type<br />

Interface Type<br />

Aggregated <strong>Ethernet</strong> for Fast <strong>Ethernet</strong><br />

Aggregate <strong>Ethernet</strong> for Gigabit <strong>Ethernet</strong><br />

4-port, 8-port, and 12-port Fast <strong>Ethernet</strong><br />

48-port Fast <strong>Ethernet</strong><br />

Tri-Rate <strong>Ethernet</strong> copper<br />

Gigabit <strong>Ethernet</strong><br />

Chapter 3: Configuring 802.1Q VLANs<br />

VLAN ID Range<br />

1 through 1023<br />

1 through 4094<br />

1 through 1023<br />

1 through 4094<br />

1 through 4094<br />

1 through 4094<br />

55

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!