BioHPLC Column Selection Guide Cover - Agilent Technologies

Column Specifications
Agilent Bio SEC-5
size exclusion Chromatography (seC)
• Maximum recovery for a broad range of size-based, biomolecule separations
• Outstanding reproducibility and column lifetime
• Excellent stability, even under high-pH, high-salt, and low-salt conditions
• Compatibility with most aqueous buffers
Agilent Bio SEC-5 HPLC columns are packed with 5 µm silica particles coated with a proprietary,
neutral, hydrophilic layer for maximum efficiency and stability. Our specially designed packing also
provides high pore volume, improving both peak capacity and resolution.
Bio SEC-5 columns are available in 5 µm particles with 100Å, 150Å, 300Å, 500Å, 1000Å,
and 2000Å nominal pore sizes.
Pore Size Particle Size MW Range pH Range Max Pressure Flow Rate
100Å 5 µm 100-100,000 2-8.5 240 bar, 3500 psi 0.1-1.25 mL/min (7.8 mm id)
0.1-0.4 mL/min (4.6 mm id)
150Å 5 µm 500-150,000 2-8.5 240 bar, 3500 psi 0.1-1.25 mL/min (7.8 mm id)
0.1-0.4 mL/min (4.6 mm id)
300Å 5 µm 5,000-1,250,000 2-8.5 240 bar, 3500 psi 0.1-1.25 mL/min (7.8 mm id)
0.1-0.4 mL/min (4.6 mm id)
500Å 5 µm 15,000-5,000,000 2-8.5 240 bar, 3500 psi 0.1-1.25 mL/min (7.8 mm id)
0.1-0.4 mL/min (4.6 mm id)
1000Å 5 µm 50,000-7,500,000 2-8.5 240 bar, 3500 psi 0.1-1.25 mL/min (7.8 mm id)
0.1-0.4 mL/min (4.6 mm id)
2000Å 5 µm >10,000,000 2-8.5 240 bar, 3500 psi 0.1-1.25 mL/min (7.8 mm id)
0.1-0.4 mL/min (4.6 mm id)
UHPLC/HPLC
3