Tsunami MP.11 Installation and Management Model 5012-SUR ...

More documents

Recommendations

Info

Monitoring Tsunami MP.11 5012-SUR Installation and Management Link Test Link Test Click Monitor > Link Test to find out which wireless stations are in range and to check their link quality. NOTE: Link Test requires Internet Explorer version 6.0 or later. Earlier versions do not support Link Test. Link Test for the unit reports the Signal-to-Noise Ratio (SNR) value in dB; the higher this number, the better the signal quality. Furthermore, it reports the signal level and noise level in dBm. The latter two are approximations of the level at which the unit receives the signal of the peer unit and the background noise. • Clicking Explore from a BSU displays all its registered SUs. • Clicking Explore from an SU displays only the BSU with which it is registered. All stations displayed after “Explore” come up “Disabled.” Select a station by changing Disabled to Start and click the Link Test button. You can change multiple stations to Start, but only the last station in the list is displayed as the remote partner when you click the Link Test button. The Link Test provides SNR, Signal, and Noise information for both, the local and the remote unit’s levels. Link Test stops when you close the Link Test page. 106
Monitoring Tsunami MP.11 5012-SUR Installation and Management Interfaces Interfaces Click Monitor > Interfaces to view detailed information about the IP-layer performance of the unit’s interfaces. There are two sub-tabs: Wireless and Ethernet. The following figures show both interfaces. 107
Page 1 and 2:
Tsunami MP.11 Installation and Mana
Page 3 and 4:
Tsunami MP.11 5012-SUR Installation
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Introduction Tsunami MP.11 5012-SUR
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Installation and Initialization Tsu
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
System Overview Tsunami MP.11 5012-
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Basic Management Tsunami MP.11 5012
Page 51 and 52:
Page 53 and 54:
Page 55 and 56: Tsunami MP.11 5012-SUR Installation
Page 59 and 60: Configuration Tsunami MP.11 5012-SU
Page 101 and 102: Monitoring Tsunami MP.11 5012-SUR I
Page 105: Monitoring Tsunami MP.11 5012-SUR I
Page 117 and 118: Commands Tsunami MP.11 5012-SUR Ins
Page 119 and 120: Commands Tsunami MP.11 5012-SUR Ins
Page 123 and 124: Procedures Tsunami MP.11 5012-SUR I
Page 133 and 134: Troubleshooting Tsunami MP.11 5012-
Page 139 and 140: Country Codes and Channels Tsunami
Page 153 and 154: Technical Specifications Tsunami MP
Page 155 and 156: Technical Specifications Tsunami MP
Page 157 and 158:
Technical Specifications Tsunami MP
Page 159 and 160:
Technical Services and Support Tsun
Page 161 and 162:
show all

Tsunami MP.11 Installation and Management Model 5012-SUR ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?