Tsunami MP.11 Installation and Management Model 5012-SUR ...

More documents

Recommendations

Info

Introduction Tsunami MP.11 5012-SUR Installation and Management Wireless Network Topologies Wireless Network Topologies The unit can be used in various network topologies and combinations. The required equipment depends upon the wireless network topology you want to build. Make sure all required equipment is available before installing the unit. You can set up the following types of topologies: • Point-to-Point Link • Point-to-Multipoint Network Each unit is set up as either a Base Station Unit (BSU) or a Subscriber Unit (SU). A link between two locations always consists of a BSU and an SU. A BSU can, depending upon its configuration, connect to one or more SUs. An SU, however, can connect only to one BSU at a time. The 5012-SUR can be configured only as an SU. Point-to-Point Link With a BSU and an SU, it is easy to set up a wireless point-to-point link as depicted in the following figure. A point-to-point link lets you set up a connection between two locations as an alternative to: • Leased lines in building-to-building connections • Wired Ethernet backbones between wireless access points in difficult-to-wire environments Point-to-Multipoint Network If you want to connect more than two buildings, you can set up a single point-to-multipoint network with a single BSU and multiple SUs, as depicted in the following figure. 10
Introduction Tsunami MP.11 5012-SUR Installation and Management Wireless Network Topologies Up to 250 SUs can be connected to a BSU. If a BSU already has 250 SU, a new SU cannot be connected to the BSU. In this figure, the system is designed as follows: • The central building B is equipped with a BSU, connected to either an omni-directional, or a wide angle antenna. • The two other buildings A and C are both equipped with an SU connected to a directional antenna. 11
Page 1 and 2: Tsunami MP.11 Installation and Mana
Page 3 and 4: Tsunami MP.11 5012-SUR Installation
Page 9: Introduction Tsunami MP.11 5012-SUR
Page 13 and 14: Introduction Tsunami MP.11 5012-SUR
Page 15 and 16: Installation and Initialization Tsu
Page 29 and 30: System Overview Tsunami MP.11 5012-
Page 49 and 50: Basic Management Tsunami MP.11 5012
Page 59 and 60: Configuration Tsunami MP.11 5012-SU
Page 61 and 62:
Configuration Tsunami MP.11 5012-SU
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Monitoring Tsunami MP.11 5012-SUR I
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Tsunami MP.11 5012-SUR Installation
Page 117 and 118:
Commands Tsunami MP.11 5012-SUR Ins
Page 119 and 120:
Commands Tsunami MP.11 5012-SUR Ins
Page 121 and 122:
Page 123 and 124:
Procedures Tsunami MP.11 5012-SUR I
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Troubleshooting Tsunami MP.11 5012-
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Country Codes and Channels Tsunami
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Technical Specifications Tsunami MP
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Technical Services and Support Tsun
Page 161 and 162:
show all

Tsunami MP.11 Installation and Management Model 5012-SUR ...

Create successful ePaper yourself

Delete template?

Save as template?