Tsunami MP.11 Installation and Management Model 5012-SUR ...
Tsunami MP.11 Installation and Management Model 5012-SUR ...
Tsunami MP.11 Installation and Management Model 5012-SUR ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Procedures <strong>Tsunami</strong> <strong>MP.11</strong> <strong>5012</strong>-<strong>SUR</strong> <strong>Installation</strong> <strong>and</strong> <strong>Management</strong><br />
Configuration Backup<br />
Configuration Backup<br />
You can back up the <strong>5012</strong>-<strong>SUR</strong> configuration by uploading the configuration file. You can use this file to restore the<br />
configuration or to configure another <strong>5012</strong>-<strong>SUR</strong> (see Configuration Restore).<br />
To upload a configuration file through the Web Interface:<br />
1. Set up the TFTP server as described in TFTP Server Setup.<br />
2. Access the <strong>5012</strong>-<strong>SUR</strong> as described in Logging in to the Web Interface.<br />
3. Click Comm<strong>and</strong>s > Upload.<br />
4. Fill in the following details:<br />
• Server IP Address <br />
• File Name <br />
• File Type Config<br />
• File Operation Upload<br />
5. Click OK to start the file transfer.<br />
The <strong>5012</strong>-<strong>SUR</strong> uploads the configuration file. The TFTP server program should show upload activity after a few seconds.<br />
When the upload is complete, the configuration is backed up.<br />
124