Tsunami MP.11 Installation and Management Model 5012-SUR ...

More documents

Recommendations

Info

Introduction Tsunami MP.11 5012-SUR Installation and Management Management and Monitoring Capabilities Management and Monitoring Capabilities There are several management and monitoring interfaces available to the network administrator to configure and manage the unit: • Web Interface • Command Line Interface • SNMP Management Web Interface The Web interface (HTTP) provides easy access to configuration settings and network statistics from any computer on the network. You can access the Web interface over your network, over the Internet, or with a crossover Ethernet cable connected directly to your computer’s Ethernet port. See Logging in to the Web Interface. Command Line Interface The Command Line Interface (CLI) is a text-based configuration utility that supports a set of keyboard commands and parameters to configure and manage the unit. You enter command statements, composed of CLI commands and their associated parameters. You can issue commands from the keyboard for real-time control or from scripts that automate configuration. See the Tsunami MP.11/QB.11 Reference Manual for more information about the Command Line Interface. SNMP Management In addition to the Web interface and the CLI, you also can manage and configure your unit using the Simple Network Management Protocol (SNMP). Note that this requires an SNMP manager program (sometimes called MIB browser) or a Network Manager program using SNMP, such as HP OpenView or Castelrock’s SNMPc. The units support several Management Information Base (MIB) files that describe the parameters that can be viewed and configured using SNMP: • mib802.mib • orinoco.mib • rfc1213.mib • rfc1493.mib • rfc1643.mib Proxim provides these MIB files on the CD included with your unit. You must compile one or more of these MIB files into your SNMP program’s database before you can manage your unit using SNMP. See the documentation that came with your SNMP manager for instructions about how to compile MIBs. NOTE: When you update the software in the unit, you must also update the MIBs to the same release. Because the parameters in the MIB may have changed, you will not otherwise have full control over the features in the new release. The enterprise MIB (orinoco.mib) defines the read and read/write objects you can view or configure using SNMP. These objects correspond to most of the settings and statistics that are available with the other management interfaces. See the enterprise MIB for more information; the MIB can be opened with any text editor, such as Microsoft Word, Notepad, and WordPad. See SNMP Parameters. IMPORTANT! Using a serial connection, you can access the CLI of the unit through a terminal emulation program such as HyperTerminal. (See “HyperTerminal Connection Properties” in the Tsunami MP.11/QB.11 Reference Manual.) For all other modes of connection, you will need the IP address of the unit in order to use the Web Interface, SNMP, or the CLI via telnet. See Setting the IP Address with ScanTool for more information. 12
Introduction Tsunami MP.11 5012-SUR Installation and Management Management and Monitoring Capabilities IMPORTANT! The remainder of this User Guide discusses installing the unit and managing it using the Web interface only. For information on managing the unit via the CLI, see the Tsunami MP.11/QB.11 Reference Manual. 13
Page 1 and 2: Tsunami MP.11 Installation and Mana
Page 3 and 4: Tsunami MP.11 5012-SUR Installation
Page 9 and 10: Introduction Tsunami MP.11 5012-SUR
Page 11: Introduction Tsunami MP.11 5012-SUR
Page 15 and 16: Installation and Initialization Tsu
Page 29 and 30: System Overview Tsunami MP.11 5012-
Page 49 and 50: Basic Management Tsunami MP.11 5012
Page 59 and 60: Configuration Tsunami MP.11 5012-SU
Page 61 and 62: Configuration Tsunami MP.11 5012-SU
Page 63 and 64:
Configuration Tsunami MP.11 5012-SU
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Monitoring Tsunami MP.11 5012-SUR I
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Tsunami MP.11 5012-SUR Installation
Page 117 and 118:
Commands Tsunami MP.11 5012-SUR Ins
Page 119 and 120:
Commands Tsunami MP.11 5012-SUR Ins
Page 121 and 122:
Page 123 and 124:
Procedures Tsunami MP.11 5012-SUR I
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Troubleshooting Tsunami MP.11 5012-
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Country Codes and Channels Tsunami
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Technical Specifications Tsunami MP
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Technical Services and Support Tsun
Page 161 and 162:
show all

Tsunami MP.11 Installation and Management Model 5012-SUR ...

Create successful ePaper yourself

Delete template?

Save as template?