Tsunami MP.11 Installation and Management Model 5012-SUR ...

Configuration Tsunami MP.11 5012-SUR Installation and Management
Management Parameters
Management Parameters
Use the Management tab to configure passwords and other service parameters.
Passwords
The Password tab lets you configure the SNMP, Telnet, and HTTP (Web Interface) passwords.
For all password fields, the passwords must be between 6 and 32 characters. Changes take effect immediately after you
click OK.
• SNMP Read Community Password: The password for read access to the 5012-SUR using SNMP. Enter a password
in both the Password field and the Confirm field. The default password is public.
• SNMP Read/Write Community Password: The password for read and write access to the 5012-SUR using SNMP.
Enter a password in both the Password field and the Confirm field. The default password is public.
• Telnet (CLI) Password: The password for the CLI interface. Enter a password in both the Password field and the
Confirm field. The default password is public.
• HTTP (Web) Password: The password for the Web browser HTTP interface. Enter a password in both the Password
field and the Confirm field. The default password is public.
Services
The Services tab lets you configure the SNMP, Telnet, and HTTP (Web Interface) parameters. Changes to these
parameters require a reboot to take effect.
80