Tsunami MP.11 Installation and Management Model 5012-SUR ...
Tsunami MP.11 Installation and Management Model 5012-SUR ...
Tsunami MP.11 Installation and Management Model 5012-SUR ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Installation</strong> <strong>and</strong> Initialization <strong>Tsunami</strong> <strong>MP.11</strong> <strong>5012</strong>-<strong>SUR</strong> <strong>Installation</strong> <strong>and</strong> <strong>Management</strong><br />
Hardware Overview<br />
Wireless LED<br />
Power LED<br />
Ethernet LED<br />
Reload button<br />
Ethernet port<br />
Serial port<br />
Reset button<br />
Power-over-Ethernet<br />
The <strong>5012</strong>-<strong>SUR</strong> is equipped with a Power-over-Ethernet (PoE) module so it can also be powered through a PoE injector<br />
such as the Proxim 1-Port Active Ethernet DC Injector (ordered separately; P/N 4301-US/-AU/-EU/-UK). Using PoE, you<br />
can provide electricity <strong>and</strong> wired connectivity to the unit over a single Category 5 cable.<br />
• The PoE integrated module receives –48 VDC over a st<strong>and</strong>ard Cat5 Ethernet cable.<br />
• Maximum power supplied to the <strong>5012</strong>-<strong>SUR</strong> is 11 Watts. The units typically draw less than 9 Watts.<br />
• You must have a PoE injector connected to the network to use PoE. The injector is not a repeater <strong>and</strong> does not<br />
amplify the Ethernet data signal.<br />
• If connected to a PoE DC Injector <strong>and</strong> an AC power supply simultaneously, the radio draws power from PoE.<br />
• The cable length between the PoE DC Injector <strong>and</strong> the radio should not exceed 100 meters (approximately 325 feet).<br />
15
Change language