Tsunami MP.11 Installation and Management Model 5012-SUR ...

More documents

Recommendations

Info

Commands Tsunami MP.11 5012-SUR Installation and Management Downgrade Downgrade Click Commands > Downgrade to downgrade to a previous release. Once you enter this command, the unit is downgraded to the specified release and is automatically rebooted. The filename specified and the filename of the image selected for downgrade must be the same version. The unit will download the file, re-format the configuration to match the version, and reboot to put the image into effect. 120
Tsunami MP.11 5012-SUR Installation and Management Procedures 9 This chapter describes the following procedures: • TFTP Server Setup: Prepares the TFTP server for transferring files to and from the 5012-SUR. This procedure is used by the other procedures that transfer files. • Web Interface Image File Download: Upgrades the embedded software. • Configuration Backup: Saves the configuration of the 5012-SUR. • Configuration Restore: Restores a previous configuration through configuration file download. • Soft Reset to Factory Default: Resets the 5012-SUR to the factory default settings through the Web or Command Line Interface. • Hard Reset to Factory Default: In some cases, it may be necessary to revert to the factory default settings (for example, if you cannot access the 5012-SUR or you lost the password for the Web Interface). • Forced Reload: Completely resets the 5012-SUR and erases the embedded software. Use this procedure only as a last resort if the 5012-SUR does not boot and the “Hard Reset to Factory Default” procedure did not help. If you perform a “Forced Reload,” you must download a new image file as described in Image File Download with the Bootloader. • Image File Download with the Bootloader: If the 5012-SUR does not contain embedded software, or the embedded software is corrupt, you can use this procedure to download a new image file. 121
Page 1 and 2:
Tsunami MP.11 Installation and Mana
Page 3 and 4:
Tsunami MP.11 5012-SUR Installation
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Introduction Tsunami MP.11 5012-SUR
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Installation and Initialization Tsu
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
System Overview Tsunami MP.11 5012-
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Basic Management Tsunami MP.11 5012
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Configuration Tsunami MP.11 5012-SU
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70: Configuration Tsunami MP.11 5012-SU
Page 101 and 102: Monitoring Tsunami MP.11 5012-SUR I
Page 115 and 116: Tsunami MP.11 5012-SUR Installation
Page 117 and 118: Commands Tsunami MP.11 5012-SUR Ins
Page 119: Commands Tsunami MP.11 5012-SUR Ins
Page 123 and 124: Procedures Tsunami MP.11 5012-SUR I
Page 133 and 134: Troubleshooting Tsunami MP.11 5012-
Page 139 and 140: Country Codes and Channels Tsunami
Page 153 and 154: Technical Specifications Tsunami MP
Page 159 and 160: Technical Services and Support Tsun
Page 161 and 162: Tsunami MP.11 5012-SUR Installation
show all

Tsunami MP.11 Installation and Management Model 5012-SUR ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?