Operating Manual

15
Processing and creating leftovers
15.1 General
This is not properly speaking a database but a way of quickly accessing
the leftovers of the current assortment and their available quantities.
New leftovers can be quickly measured. The process is similar to Section
10.2.1 «Measuring ink leftovers or loading them from ColorNet», but in
addition the substrate can also be defined.
15.2 Opening the leftovers database
1. Click on Leftovers in the Database menu. The Define leftovers
window appears.
A list of the leftovers for the current assortment is displayed, together
with their available quantities.
With New you can measure a new leftover ( see Section 15.3
«Measuring a new leftover»).
With Process you can change data relating to the selected leftover, in
particular the available quantity.
With Delete the selected leftover is deleted.
15.3 Measuring a new leftover
Here you can only measure one concentration grade. If you want to
measure several concentration grades, proceed as for measuring a
normal color ( see Section 14.4.3 «Defining an assortment»).
1. Click on New in the Define leftovers. The Measure leftovers
window appears.
2. Set up the spectrophotometer to measure the leftover
and click on Measure.
15 • Processing and creating leftovers 119