Operating Manual

OPERATING MANUAL
2. Click on the desired recipe and then on Select. The recipe will be
converted into an ink leftover and added to the current assortment.
In the Colorant selection window the original designation of the recipe
will then be displayed in the Selected colorants field, marked with
a $ - sign.
10.3 Converting a recipe into a leftover
The menu command Recipe > Convert to leftover can be used to convert
an existing recipe into a leftover.
1. Load the recipe which you want to convert.
2. Click in the Recipe menu on Convert to leftover. The Set up colorant
window appears.
3. Enter a designation and the available quantity.
The remaining information will be calculated automatically.
4. Click on OK, when you have made all the entries. The recipe will
be converted into a leftover and added to the current assortment.
10.4 Reducing leftovers
When you have created a recipe with leftovers, you can automatically
deduct the leftover quantities used in the recipe. Then only the reduced
leftover quantities will be taken into account in the next formulation.
1. In the Recipe menu click on Reduce leftovers. The Reduce leftovers
window appears.
2. Click on OK, when you accept the suggested values.
If more than one leftover is used in the recipe, these are deducted one
after the other. Confirm each time with OK.
78
10 • Using ink leftovers