Operating Manual
Operating Manual
Operating Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
17<br />
Processing and creating substrate formats<br />
17.1 General<br />
If you enter the substrate formats which you normally use, then after<br />
formulation, you can calculate the ink quantity needed for a particular<br />
print job ( see Section 5.3 «Calculating the ink quantity»)<br />
17.2 Opening database substrate formats<br />
1. Click on Substrate sizes in the Database menu. The Database:<br />
Substrate sizes window appears.<br />
The title line shows the name of the current database. If you want to<br />
change the database, please note Section 20.3 «Selecting a database».<br />
On the left of the window is an alphabetically ordered list of all stored<br />
substrate formats. You can also sort them by date of saving. Simply click<br />
on the Sorted according to field and select the Date/Time option.<br />
17.3 Processing an existing substrate format<br />
1. In the list on the left of the Database: Substrate sizes window,<br />
click on the substrate format you want to process.<br />
2. Click on Modify. The Modify substrate size window appears.<br />
Here, you can change or supplement the designation, the additional<br />
description, the substrate length and width or the unit. Proceed in the<br />
same way as for the definition of a new substrate format ( see<br />
Section 17.4 «Defining a new substrate format»).<br />
17 • Processing and creating substrates formats 131