Operating Manual

. Selecting the substrate of current assortment/recipe
1. Select the Substrate of current assortment or the Substrate
of current recipe option and click on OK. The Color Selection
window is displayed ( see Section 5.2.5 «Selecting colorants
from the assortment»).
c. Selecting substrate from database
1. Select the Substrate from database option and click on OK.
The Substrate Selection window appears.
2. Click on the desired substrate.
3. Click on Select. The selected substrate is loaded and then
the Color Selection window is displayed ( see Section 5.2.5
«Selecting colorants from the assortment»).
5.2.5 Selecting colorants from the assortment
The area on the left indicates the colorants available. The area in the
center lists the colorants selected from the current assortment. This
always includes transparent white.
If there is more than one transparent white included in the current assortment,
these are shown in a separate list. The standard transparent
white is pre-selected. By clicking on the arrow keys you can select a
different transparent white.
The command button Save group can be used to put into a group colors
which are always used together in formulations ( see Section 14.4.9
«Forming color groups»).
1. In the Available colorants field, click on the colorant you want
to use for the formulation.
2. Click on the pushbutton with the arrow showing to the right.
The colorant appears in the Selected colorants field.
You can use the same procedure to return colorants from the Selected
colorants field to the Available colorants field. A quicker way of
selecting the desired colorant is to double click on it. The colorant is
then immediately placed in the other field. If you click on the pushbutton
with the double arrow, all the colorants are moved to the other field.
5 • Formulating a target color 43