Operating Manual

6
Calculating a correction recipe
6.1 General
If the mix of a basic recipe does not meet your requirements, you can
calculate a correction recipe basing on the measurement of the current
ink mixture and so achieve a better match with the target color.
Selection between the Basic recipe mode and Addition mode can be
made with the menu command Settings > Formulation ( see Section
22.2 «Formulation settings»).
- If the Basic recipe mode is selected, an improved basic recipe
is displayed for recipe output in the main window.
- If the Addition mode is selected, the ink quantities for the basic recipe
and additional ink are displayed separately in the main window.
6.2 Correction recipe
1. Click on the Correction recipe symbol or on Correction recipe
in the Formulate menu.
2. Correct the list of colorants selected ( see Section 5.2.5 «Selecting
colorants from the assortment») and then click on OK.
In every case, the colorants contained in the basic recipe will be used
in the correction recipe.
3. Define the current ink mixture, provided this has not already been
defined earlier ( see Section 5.9 «Measure current ink mixture»).
Proceed in the same way as for defining a target color (
Section 5.2.3 «Defining a target color»).
The correction recipe is then calculated.
see
6 • Calculating a correction recipe 57