Operating Manual

OPERATING MANUAL
19.3 Processing existing film thickness objects
1. Click in the left-hand part of the Database: film thickness
objects window on the film thickness object which you want to process
and then on Process. The Enter film thickness object window appears.
Here you can alter or add to the designation, additional description,
printing process and film thickness/weight per area/ink quantity of the
film thickness object. Proceed exactly as when defining a new film
thickness object ( see Section 20.4 «Defining new film thickness
objects»).
2. Make the required changes and then click on OK.
19.4 Defining new film thickness objects
1. Click on New in the Database: film thickness objects window.
The Enter film thickness object window appears.
2. Make the entries for designation, printing process, film thickness/
weight per area/ink quantity of the screen or roller.
Make sure that you use the same unit of measurement for the film
thickness data for the different screens or rollers.
19.5 Deleting film thickness objects
1. Click in the Database menu on Film thickness objects.
In the Film thickness objects window on the left-hand side
the list of film thickness objects is displayed.
2. Click on the film thickness object which you want to delete.
3. Click on Delete. The Confirm delete window appears.
4. Click on OK.
19.6 Sending film thickness objects
In the Database: Film thickness objects window you can select one or
more film thickness objects and send them by email by then clicking on
Send. Please note Section 3.6.4 «Email».
144
19 • Processing and creating fim thickness objects