Operating Manual

OPERATING MANUAL
Setup: If you click on Setup, the Modify batching system window is
displayed.
Specific data can be entered here for the weighing or batching system
(e.g. interface, output file, etc.). Pay careful attention to the operating
instructions from the relevant manufacturer.
5. Click on OK when all inputs have been made. The designation
of the batching system is then displayed in the Selected batching
systems field.
Define colorant designations for batching systems
If a batching system uses different colorant designations from the assortment,
you can enter these in the Define colorant designations for
batching systems window .
Procedure:
1. In the Batching systems settings window, click on Setup. The Define
colorant designations for batching systems window comes up.
2. On the left-hand side of the window, select an assortment. The colors
in the assortment are displayed on the right-hand side of the window.
3. Select a color and enter the corresponding designation in the Designation
for batching systems field .
4. When you have entered all the color designations, click on Close.
172
22 • Making settings