Operating Manual

Following the recalculation, the modified recipes are listed again, showing
the relevant Delta E values. This makes it possible to tell at a glance
whether the modified recipes are acceptable in terms of accuracy or
whether they should be recalculated again in different conditions, e.g.
with all colors in the assortment available.
In any case, you must be aware that the recipes that have been calculated
are theoretical recipes which should be printed out and tested again
before next being used in production.
1. Click on Search in the window Database: Recipes. The window Search
criteria is displayed.
Show recipes of folder: Select the folder to search for the recipes which
need modifying. It is also possible to search all folders.
Show recipes of assortment: Select the assortment in which a pigment
needs replacing.
Show recipes with colorant: Select the assortment colorant in which the
pigment has been replaced.
Show recipes with substrate: Select a substrate if only recipes which
have to be printed on a specific substrate should be included.
The search can be further restricted using the Show only leftover recipes
and Show only pallet recipes check boxes.
13 • Managing recipes 93