DocAve 6 Service Pack 3 Control Panel Reference Guide - AvePoint

ii. Destination – Specify the directory where you are about to store the caches.• If you select Local Path in the Device Type field, enter a path in theLocal path text box.• If you select UNC Path in the Device Type field, enter a path in the UNCpath text box and select a managed account profile from the drop-downlist to access the specified UNC path.iii. Click Validation Test to test the entered path is valid.iv. Click OK to save the cache location or click Cancel to exit the current pagewithout saving any configuration.If more than one cache location is configured for the Media service, DocAve will storecache data according to the order of the cache locations listed here. Change the order inwhich the cache locations are listed in by selecting its desired place in the list from thecorresponding drop-down menu under the Order column. Once all of the cachelocations are full, the oldest data will be deleted to make room for new data.• Edit Cache Location – Edits an existing cache location. Select a cache location byselecting the corresponding checkbox. Click Edit Cache Location on the ribbon to edit it.The editing steps are the same as the creating steps; refer to the creating steps abovefor more information.• Refresh – Refreshes one or more cache locations to view the usage information. Selectone or more cache locations by selecting the corresponding checkboxes. Click theRefresh link or Refresh on the ribbon to refresh the selected cache locations. The usageinformation is displayed in the Free Space column.• Delete – Deletes one or more cache locations. Select one or more cache locations byselecting the corresponding checkboxes. Click the delete ( ) button or Delete on theribbon to delete the selected cache locations.*Note: The Media service must have at least one cache location. If you attempt todelete the only cache location configured for a Media service, an error message will popup, and the selected cache location will not be deleted.2. Threshold – Specify the cache location free space threshold. The threshold you set will be thelowest amount of free space a cache location can have before either another cache location (ifconfigured) is used, or the data is deleted. To set the Threshold, enter the number in Megabytesinto the corresponding text box.*Note: By default, the threshold is 1024 MB. If the cache location is in the system disk, keep atleast 1024 MB of free space to ensure that the performance of the operating system is notaffected.3. Click OK on the ribbon to save the configurations and return to the Manager Monitor interface,or click Cancel to return to the Manager Monitor interface without saving any configurations.DocAve 6: Control Panel15