DocAve 6 Service Pack 3 Control Panel Reference Guide - AvePoint

ooClick Select. A new Select Certificate pop-up window will appear for you tospecify a token-signing certificate to communicate with ADFS. This certificatemust be the same as the one configured in ADFS.Click Find Certificate to search for a desired certificate, and then select a Findin: parameter from the drop-down menu, enter the keywords in the Contains:text box, select a Look in field: parameter from the drop-down menu, and thenclick Find Now to start the search. Click Stop to stop the search. Once you haveselected your desired certificate, click OK to save and exit the Select Certificateinterface, or click Back to exit the Select Certificate interface without savingspecifying a certificate.*Note: The certificate specified here must be the same as the one configured in ADFS.b.Token-decrypting (optional) – Complete one of the following actions:ooClick Select. A new Select Certificate pop-up window appears for you to specifya token-decrypting certificate to protect the communication between DocAveand ADFS. This certificate must be the same as the one configured in ADFS.Click Find Certificate to search for the desired certificate. Select a Find in:parameter from the drop-down menu, enter the keywords in the Contains: textbox, select a Look in field: parameter from the drop-down menu, and then clickFind Now to start the search. Click Stop to stop the search. Once you haveselected your desired certificate, click OK to save and exit the Select Certificateinterface, or click Back to exit the Select Certificate interface without savingspecifying a certificate.When you are finished configuring the Security Token Settings, click Next to configure the ClaimConfiguration.3. Claim Configuration – Configure the mappings between the Claim Name displayed in DocAveand the Claim Type displayed in ADFS. You can perform the following actions to your claims:a.You can change the order of the claims in the Order column of the table. If a user can beidentified using several claims, DocAve will use the Claim Name of the first claim listedhere as the display name for each respective user.b.Click the delete () button to delete the selected claim.c.Click Auto to have the claim type be specified automatically after you select the claimname from the Claim Name drop-down menu. Click Manu to add the claims manually.Click Auto to switch back to the default option.4. Overview – Review the settings you have configured in the previous steps. To make changes,click Edit in the corresponding section, and you will be brought back to that step so you canmake changes.28DocAve 6: Control Panel