DocAve 6 Service Pack 3 Control Panel Reference Guide - AvePoint

In each of the tabs, you will see the name of the service. For each service, the following options can beconfigured.• Service Host – The server where the service resides.• Log Level – Logs could be configured to generate on each of the following levels.ooInformation (default) – Logs of this level record the basic information ofDocAve, such as the jobs that you have ran, the operations you have performedand important processes of jobs. Information level logs also contain all of thelogs from Warning and Error levels.Debug – Logs of this level record the detailed information related to the internaloperations such as the communication between DocAve Manager and DocAveAgent, the operations in the database, the output message of the data.Logs of this level are used for finding out all of the details of the jobs, and it isrecommend that the level is set to Debug before troubleshooting. Debug levellogs also contain all of the logs from Information, Warning, and Error levels.ooError – Logs of this level record the error messages for jobs. Not all of the errorscould lead to the failure of the jobs, some of the errors have already been dealtwith and the logs will record the detailed information.Warning – Logs of this level record exceptions for jobs. Warning level logs alsocontain all of the logs from Error level.*Note: After changing the log levels, the changes will not affect the previous logs butwill affect the newly generated logs.• Size of Each Log File –The default size for a log is 5 MB. You can adjust the size accordingto your requirements by entering a different number into the text box.• Total Log File Limit – The default value is 10. The maximum number of all of the log filesin the Logs folder under the installation folder of each Manager service. For each Agentserver, the Total Log File Count is the maximum number of all of the log files which canbe generated by each .exe file. The Agent logs are stored in the Logs folder under theinstallation folder of each Agent.When the number of log files exceeds the threshold, the oldest log files will be deleted.When you are finished configuring Log Settings, click OK to save all changes and return to the LogManager interface, or click Cancel to return to the Log Manager interface without saving any changes.You can also configure the log settings in batch by selecting the checkboxes in front of the Service Nameand clicking Batch Log Settings in the ribbon. On the batch settings interface, you can configure the loglevel, size of each log file, and total log count file.DocAve 6: Control Panel71