DocAve 6 Service Pack 3 Control Panel Reference Guide - AvePoint

oSelect an e-mail notification profile you previously configured from the dropdownlist or click New Notification to set up a new e-mail notification. For moreinformation about how to configure notification, refer to the User NotificationSettings section in this user guide.Turn off automatic updates – The automatic updates function will be turned offand you will not be notified about the DocAve updates.• Proxy Selection – Select the proxy protocol you wish to use from the Proxy type dropdownmenu:Checking for UpdatesoooNo Proxy (default) – No proxy server will be used.HTTP Proxy – Select this to use the HTTP proxy, and then configure thefollowing settings:• Proxy host – The host name or IP address of the proxy server.• Proxy port – The port used to access the proxy server.• Username – The username to log in to the proxy server.• Password – The password to access the proxy server.SOCKS5 Proxy – Select this to use the SOCKS5 proxy, and then configure thefollowing settings:• Proxy host – The host name or IP address of the proxy server.• Proxy port – The port used to access the proxy server.• Username – The username to log on the proxy server.• Password – The password to access the proxy server.To check for the latest updates, click Check for Updates on the ribbon.*Note: You can only check for updates after having purchased maintenance for DocAve.If there are any new updates available, the following information will be displayed in the area on theright:• Update Name – The name of the update.• Product Name – DocAve or Governance Automation.• Type – The type of the update.• Size – The size of the update. The unit of the size is megabyte.• Status – The installation status of the update.• Version – The version of the update.56DocAve 6: Control Panel