DocAve 6 Service Pack 3 Control Panel Reference Guide - AvePoint

Click and drag the logo in the display field to change its placement. Click the zoom in ( )button to zoom in, the zoom out ( ) button to zoom out, or the reset the settings ( )button to reset the settings of the new logo. Click the Restore to Default button to rollback to the default logo.• Farm Name Mapping – Customize the display names for your farms in DocAve. To find aspecific farm, enter the farm name in the search text box, and click the magnifying glass( ) button to search.*Note: The search function is not case sensitive. For each farm, enter the desireddisplay name in the corresponding Display Name text box.When you are finished configuring DocAve General Settings, click Save to save all changes, and thenclick Close to close the System Options interface. If you click Close without saving first, any changes youhave made will be lost.Configuring Security SettingsTo access Security Settings for DocAve, in the Control Panel interface, click Security Settings under theSystem Options heading. There are two tabs under Security Settings, System Security Policy andSystem Password Policy.System Security PolicyIn the System Security Policy tab, the following options can be configured:• Maximum User Session – Configure the number of simultaneous logons allowed forDocAve. For any new sessions that surpass the designated number, the earliest sessionwill be terminated.• Session Timeout – Configure how long a user can be inactive before being automaticallylogged off. Enter an integer into the Logon will expire in: text box, and then selecteither Minute(s) or Hour(s) in the drop-down menu.• Failed Logon Limitation – Specify the maximum number of failed logon attemptsallowed in one day. If a specific account fails to provide the correct login information ina single day, it will be locked. To unlock the specified account, refer to AccountManager.*Note: This setting only affects local users besides the default Admin account. ActiveDirectory users and Windows users added in DocAve are not affected by the limitations.• Inactive Period – Configure how long a user can be inactive before the account isautomatically disabled. Enter an integer into the Deactivate the account when theinactive period reaches: text box, and then select either Day(s) or Month(s) in the dropdownmenu. Once deactivated, a DocAve administrator must activate the accountbefore the user can log into DocAve.22DocAve 6: Control Panel