DocAve 6 Service Pack 3 Control Panel Reference Guide - AvePoint

are sure you want to proceed with the deletion. Click OK to delete the selected physical devices, or clickCancel to return to the Storage Configuration interface without deleting the selected physical devices.Configuring Physical DevicesTo create a new physical device, click Create on the ribbon, and then select Physical Device from thedrop-down menu. To modify a previously configured physical device, select the physical device, andthen click Edit on the ribbon. Because DocAve supports a number of types of physical devices, eachdevice type requires different configurations. In the sections that follow, you will find instructions onconfiguring the following types of physical devices: Net Share, FTP, Amazon S3, AT&T Synaptic, Box,Caringo Storage, DELL DX Storage, Dropbox, EMC Atmos, EMC Centera, GoogleDrive, HDS HitachiContent Platform, Rackspace Cloud File, OneDrive, TSM, and Windows Azure Storage..*Note: For physical devices with the Advanced option, refer to the information below.Net Share• Only use the extended parameters to fulfill your special requirements.• Except for the FileSpace parameter of TSM, all of the extended parameters and theirvalues are not case-sensitive.In the Create Physical Device or Edit Physical Device interface, configure the following settings:• Physical Device Name – Enter a Name for this physical device. Then type an optionalDescription for future reference.• Storage Type – Select Net Share from the drop-down list.• Storage Type Configuration – Enter the UNC Path, and then select a managed accountprofile from the drop-down list. If the path you specified does not exist, it will becreated automatically.• Advanced – Specify the following extended parameters in advanced settings ifnecessary. If you have multiple parameters to enter, press Enter on the keyboard toseparate the parameters. Refer to the instructions below to add parameters:96oooIsRetry – Whether or not to try again when DocAve failed to write the data inthe physical device.• If you enter IsRetry=true, it will try again when DocAve failed to writethe data in the physical device.• If you enter IsRetry=false, it will not try again when DocAve failed towrite the data in the physical device.BufferSize – Configure the size of the temporary storage of data. The format isBufferSize =1. The unit is MB.SecurelyDelete – Overwrites the BLOB data stored in the Net Share physicaldevices seven times with empty strings before deleting it thoroughly for thesecurity reasons.DocAve 6: Control Panel