Download - Fuji Xerox Printers

Item Setting Description AvailableSettingsReceivingProtocolSMTPPOP3Services >E-mail >Defaults >FromAddress >EditReceivingProtocolIncoming MailPrint OptionsSpecify the e-mailreceiving protocol.Configure this setting whenprinting the e-mail headerand message along withthe document attached toreceived e-mail. Specify[Attachment, Full Headers& Message] to print thereceive routing of the e-mail, etc.• SMTP• POP3*• PrintAttachmentOnly• PrintAttachment& Message ifit exists• Attachment,BasicHeaders &Message*• Attachment,Full Headers& Message◦ -◦ ◦Print DeliveryConfirmation E-mailSpecify whether or notdelivery receipt e-mailshould be printed.• Off*• On• Print whendelivery fails◦ ◦Connectivity >Protocols >POP3 SetupIP Address /Host Name &PortSpecify the IP address ofthe POP3 server forreceiving e-mail, the IPv6-addr format, or FQDN(Fully Qualified DomainName).Specify the port numberused by the POP3 server.Alphanumericcharacters plusperiod (.) andhyphen (-); upto 128 bytes1 ~ 65535- ◦POP ReceivePasswordEncryptionSelect the [APOPAuthentication] check box touse APOP for POP receiveverification.• Cleared:Disabled*• Selected:Enabled- ◦Login NameSet the login user name forthe POP3 server. Only oneuser can be specified.ASCII graphiccharacters(codes 33 to126); up to 64bytes- ◦PasswordSpecify the password for thePOP user name, and reenterthe same passwordinto [Retype Password].ASCII printablecharacters(ASCII graphiccharacters plusspace; codes32 to 126); upto 64 bytes- -Polling IntervalSpecify the interval forpolling the POP3 server formail.1 to 120minutes10 minutes*- ◦106 3 Printing