Download - Fuji Xerox Printers

*1 These settings can only be set using CentreWare Internet Services. They cannot be configured on thecontrol panel. Some security features are not supported on the model available in China.*2You can set the administrative ID and password. The default system administrator ID and password are“11111” and “x-admin”, respectively.*3 EP Service is not supported on the model available in China.*4 IC Card Reader (optional) is required. The IC Card Reader may not be supplied with the printer in someregions. Contact your dealer for details.Using CentreWare Internet ServicesFollow these steps when accessing CentreWare Internet Services.1. Start your computer and launch a web browser.2. In the URL field, enter the IP address or URL of the printer, and press the key. The top page of CentreWare Internet Services is displayed.• Example - IP address for IPv4• Example - URL• Example - IP address for IPv6Note• When specifying a port number, enter a “:” (colon) and then “80” (the factory default port number) afterthe address. Verify the printer's port number by printing [Configuration Report].• The port number can be changed under the [Properties] tab > [Connectivity] > [Protocols] > [HTTP]. Ifyou change the port number, you must enter a “:” (colon) and then the port number after the address.• Displays a screen for entering the user name and password when the Authentication function is set.Enter the ID and password of the administrator or user registered on the printer. Contact youradministrator for information on your ID and password. User information is displayed on the upper rightwhen CentreWare Internet Services is started up.• After you logged in with the ID and password for administrator or the user registered in the printer toconfigure and confirm settings, make sure to click [Logout] to log out the system in order to prevent theleakage of information.• When data encryption is enabled, enter “https” instead of “http” before the address when accessingCentreWare Internet Services.• For information about data encryption features, refer to “7.9 Security Features” (P. 343) and “7.11 ControlAccess to Printer Features by Pre-registering Users” (P. 365).44 1 Printer Environment Settings