Download - Fuji Xerox Printers

7.4 Changing an IP AddressThis section explains how to change the fixed IPv4 address on the printer manually.Note• Use CentreWare Internet Services to change the fixed IPv6 address on the printer. Use this address toaccess CentreWare Internet Services. Set the IPv6 address by selecting [Properties] tab >[Connectivity]> [Protocols] > [TCP/IP].• Changing an IP AddressImportant• Addresses including IP address, subnet mask and gateway address depend on your networkenvironment. Consult your network administrator for setting addresses.1. On the control panel, press the button to display the menu screen.SettingsLanguageEmulation2. Press the < > button until [Admin Menu] isdisplayed.Note• If you went past the desired item, return to the item bypressing the< > button.3. Press the < > or button to select.[Network/Port] is displayed.Note• If you pressed the < > or button on the wrongitem, return to the previous screen by pressing the< > or the button.• To start over from the beginning, press the button.4. Press the < > button to select. [LPD] isdisplayed.Note• [Parallel] appears only when the Parallel Port Kit(optional) is installed.5. Press the < > button until [TCP/IPSettings] is displayed.SettingsAdmin MenuAdmin MenuNetwork/PortNetwork/PortLPDNetwork/PortTCP/IP Settings6. Press the < > or button to select.[IP Mode] is displayed.TCP/IP SettingsIP Mode7. Press the < > button until [IPv4 Settings]is displayed.TCP/IP SettingsIPv4 Settings8. Press the < > or button to select.[Get IP Address] is displayed.IPv4 SettingsGet IP Address7.4 Changing an IP Address 333