Download - Fuji Xerox Printers

Note• Bypass tray is set to [No AutoTraySwitch] by default. Refer to "Setting Tray 5 (Bypass) for Auto TraySelection" (P.134) to set it for auto tray selection.• The printer does not perform auto tray selection for the tray which is set to [No AutoTraySwitch] in [PaperTray Priority].• If there is no tray that corresponds to the automatically selected tray, the printer will display a messageprompting you to load paper. You can program your printer not to display this message and have theprinter print the job on paper that is nearly the same size or larger than the document size (SubstituteTray feature).• If a tray runs out of paper during printing, the printer automatically switches to another tray that containspaper of the same size and orientation (Auto Tray Switch feature). The printer will not switch trays if the[Paper Type Priority] is set to [Auto Paper Off] for the type of paper in the tray.• You can assign names to paper of the same type and configure them as custom paper. For example, ifblue plain paper is loaded in one tray, you can name it “Plain blue” to differentiate it from other plainpaper.Refer to• “[Printer Settings]” (P. 190)Setting Tray 5 (Bypass) for Auto Tray SelectionUse the procedure below to set Tray 5 (Bypass) for auto tray selection on the control panel.You can set Tray 5 (Bypass) for auto tray selection by specifying paper tray priority andpaper size.Refer to• “Auto Tray Selection Feature” (P. 133)1. On the control panel, press the button to display the menu screen.SettingsLanguageEmulation2. Press the < > button until [Admin Menu] isdisplayed.SettingsAdmin Menu3. Press the < > or button to select.[Network/Port] is displayed.Admin MenuNetwork/Port4. Press the < > button until [PrinterSettings] is displayed.Admin MenuPrinter Settings5. Press the < > or button to select.[Substitute Tray] is displayed.Printer SettingsSubstitute Tray6. Press the < > button until [Paper TrayPriority] is displayed.Printer SettingsPaperTrayPriority7. Press the < > or button to select.[Tray 1] is displayed.PaperTrayPriorityTray 1134 4 Paper