Download - Fuji Xerox Printers

Note• If you reboot CentreWare Internet Services, [Certificate Management] will appear for [Security] on the[Properties] tab. [Certificate Management] can be used to view and select certificate data, and to exportand delete certificates.Accessing CentreWare Internet Services when Data Encryption isEnabledWhen HTTP communication is encrypted, enter “https” instead of “http” before the addresswhen accessing CentreWare Internet Services.• Example of IP address: https://192.168.1.100/(Replace the above “192.168.1.100” with IP address of your printer.)• Example of Internet address: https://xxx.yyyy.zz.vvv/Configuring Settings to Encrypt Communication Data for Printing withthe IPP PortEncrypting HTTP communication makes it possible to encrypt communication data whenprinting with the IPP port.If the printer's IPP port is disabled (the default is [Disabled]), enable the report using theprocedure under “1.5 Enabling Ports” (P. 40).Next, install a print driver on your computer and specify IPP as the output port.The following describes how to install a print driver on your computer. The procedure usesWindows XP as an example.Note• For information on how to install a print driver on your computer, refer to ‘CD-ROM Documentation(HTML)’ on the Driver CD Kit CD-ROM.1. On the Windows [Start] menu, select [Printers and Faxes] ([Printer] or [Devices andPrinters] depending on OS).2. Under [Printer Tasks], select [Add a printer].3. In the [Add Print Wizard] window, click [Next].4. Select [A network printer, or a printer attached to another computer], and then click[Next].5. Select [Connect to a printer on the Internet or on a home or office network], and thenenter the following URL into [URL]:https://IP_Address/ipp/ (where IP_Address is the IP address of the printer).Then click [Next].6. Click [Have Disk].7. In the dialog box that appears, enter (CD-ROM drive name): (folder where print driveris stored), and then click [OK].8. Select the print driver, and then click [OK].9. Specify whether to use this printer as the default printer by selecting [Yes] or [No], andthen click [Next].10. Click [Finish].360 7 Maintenance