Download - Fuji Xerox Printers

7.16 Moving the PrinterUse the following procedure when moving the printer.1. Turn off the printer’s power switch and the main power switch.2. Unplug the power cord, interface cable, and all the other cables from the printer.3. Pull out the trays from the printer, and remove any paper in them. Re-wrap the paperand store it away from dust and humidity.4. Push the trays all the way back into the printer.5. Install the handle cover to the Tray 1.handle cover6. Lift the printer and carefully move it. If moving over a long distance, pack the printer ina box.7. Remove the handle cover from the tray.Important• This product weighs 81.2 Kg. When moving it, always carry it by a team of four persons.• When moving or lifting the printer, always install the handle cover to the printer and move it carefully.After the printer is located, remove the handle cover from the printer and keep it.• In case of installing the optional 1 Tray Module, 3 Tray Module or Tandem Tray Module, be sure to installthe handle cover to lift the printer.• If optional trays are installed, remove them before moving the printer. If trays are not installed securely,they may fall and cause injuries. For information on how to remove the trays, refer to the installationguide provided with the options.81.2 kgNote• It is not needed to remove the consumables such as toner cartridges when moving the printer.386 7 Maintenance