Download - Fuji Xerox Printers

3. Adjust the paper guides to the size of thepaper.Important• Make sure that the guides are positioned lightlyagainst the paper. Paper guides that are positionedtoo tight or two narrow can cause paper jams.• Do not load paper above the maximum fill-line. Doingso can cause paper jams.Note• When printing from the bypass tray, use the print driver to configure paper size and type settings. Formore information, refer to the online help for the print driver.• When printing without using the print driver (such as lpr printing of a PDF file), use the printer’s controlpanel to configure the paper type setting. For more information, see "[Paper Type]" (P.191).Bypass Tray Feed Orientations for EnvelopesWhen loading envelopes in the bypass tray, close the flaps of the envelopes and set themwith the address side facing down. Configure the print driver settings depending on thetypes of envelopes and loading orientations as follows.Envelope C4 (229 x 324 mm)Paper feeddirectionMonarch Envelope (3.9 x 7.5”)No.10 Envelope(4.1 x 9.5”)DL Envelope (110 x 220 mm)Configure the following settings by selecting [Paper/Output]tab > [Paper] menu > [Advanced Paper Selection] dialogbox.• Original Document Size: Select the configured size of envelope• Paper Tray: Tray 5 (Bypass)• Bypass Paper Type: EnvelopePaper feeddirectionEnvelope C4 (229 x 324 mm)Paper feeddirectionEnvelope C5 (162 x 229 mm)Paper feeddirectionConfigure the following settings by selecting [Paper/Output]tab > [Paper] menu > [Advanced Paper Selection] dialogbox.• Original Document Size: Select the configured size of envelope• Paper Tray: Tray 5 (Bypass)• Bypass Paper Type: EnvelopeConfigure the following settings by selecting [Paper/Output]tab > [Paper] menu > [Mixed Sizes].• Image Rotation 180 Degrees: Portrait and landscape (Forenvelopes)Paper feeddirectionNote• Register the paper size with the length of the flap included in [Custom Paper Size] when printingenvelopes with keeping the flap open. Configure the register paper size in [Original Document Size] aswell as [Output Paper Size], and then select [Portrait and landscape (For envelopes)] in [Image Rotation180 Degrees].Load the envelopes so they feed from the bottom of the envelopes (from the opposite side of the flap).122 4 Paper