Download - Fuji Xerox Printers

Configuration for IC Card Reader (Optional)You can use a smart card for authentication by comparing the information registered on thesmart card and the user information on the machine. You can also restrict the machine useand perform accounting of the jobs using the information registered on the smart card.Note• The IC Card Reader may not be supplied with the printer in some regions. Contact your dealer fordetails.• Extension HDD Kit (optional) is required for installing the IC Card Reader.Available Smart CardThe following smart card types are supported by the embedded IC Card Reader.• MIFARE (Type A)• Fuji Xerox IC Card (Type A)• Other MIFARE compatible smart cards*• eLWISE/ELWISE (Type B)• eLWISE• ELWISE• FeliCa• Fuji Xerox IC Card• SSFC• Other FeliCa compatible smart cards**: The embedded IC Card Reader of the machine may not support some smart cards.Smart Card SettingsThe system administrator can register smart cards using CentreWare Internet Services.Note• For details about each setting item, refer to the online help for CentreWare Internet Services.1. Launch your web browser and access CentreWare Internet Services.Note• For information on how to access CentreWare Internet Services, refer to “1.6 Configuring the PrinterUsing CentreWare Internet Services” (P. 41).• If you are prompted to enter the administrator's ID and password, enter them and click [OK].2. Click the [Properties] tab.3. On the menu on the left, click [Security] >[Smart Card Settings].4. Click [General].5. Click [Enabled] in the [Smart Card].6. Select the [Enabled] check box if a confirmation sound needed at the time ofauthentication or canceling authentication.7. Click [Apply].8. Click [Detailed Settings] in the [Smart Card Settings].9. Click the [Edit] button in the [Smart Card Selection Settings].10. Select the [Enabled] check box, and then set the priority.11. Click [Apply].7.11 Control Access to Printer Features by Pre-registering Users 371