Download - Fuji Xerox Printers

2.6 Importing Printer Information to a PrintDriverIf your printer is networked, you can import printer information (such as accessoryconfiguration, and sizes and types of paper in the paper trays) into your print driver usingSNMP protocol. This can be done on the [Configuration] tab on your print driver. Thefollowing procedure is described based on Windows XP. After installing the print driver, usethis procedure to obtain printer information manually for adding options and configuringpaper settings. You can also set to obtain the printer information automatically for each printjob.Note• This function is not available when the printer is directly connected to the computer via parallel cable orUSB cable. In this case, configure settings of the applicable print driver items manually. Refer to “SetPrinter Information Manually” (P. 68) for the procedure. In this case, the paper types and paper sizesloaded in the trays are not displayed.• To use this function, the control panel must be used to enable the printer’s SNMP port (Initial default:[Enabled]).Obtain Printer Information by Specifying Printer Name and IP Address1. On the [Start] menu, select [Printers and Faxes] (Select [Printer] or [Devices andPrinters] depending on OS) and display the properties of the printer being used.2. Click the [Configuration] tab.3. Click [Bi-Directional Setup].34. Click [Get Information from Printer].42.6 Importing Printer Information to a Print Driver 65