Download - Fuji Xerox Printers

More documents

Recommendations

Info

[When Jam Occurs]System SettingsWhen Jam OccursSettingWhen Jam OccursDescriptionSpecify how the printer handles print jobs if a paper jam occurs while printing.• [ClearJam ToResume] (default)The printer resumes printing after a paper jam is cleared.• [Delete Job]The printer cancels the print job after a paper jam is cleared.[Drum Life End]System SettingsDrum Life EndSettingDrum Life EndDescriptionA message indicating that the replacement life of a drum cartridge isapproaching appears approximately 7,500 pages* before the replacement lifeof the drum cartridge is reached. Approximately 2,300 pages* before thereplacement life is reached, a message indicating the drum cartridge needs tobe replaced soon appears. Select whether or not to cancel printing when thedrum cartridge has reached its replacement cycle.Select whether or not to cancel printing when a drum cartridge has reached itsreplacement cycle.• [Cancel Printing] (default)After the drum cartridge replacement message appears, printing is disableduntil the drum cartridge is replaced with a new one.• [Continue to Print]Even if a drum cartridge replacement life is reached, printing is not disabledimmediately. Printing will be forcibly canceled to protect the printer at thepoint when abnormality is detected in the drum cartridge.Note, however, that printer performance such as print quality might bedeteriorated when printing is continued beyond the replacement cycle of adrum cartridge. We recommend users to prepare new drum cartridge forimmediate replacement, as printing might be stopped soon.*: The page yield of each consumable varies depending on print requests, documents printed, how oftenthe power is switched on/off or temperature and humidity of the environment where the printer is located.For more information, refer to “A.3 Life of Consumables and Regular Replacement Parts” (P. 402).[ExtendAdjustTime]System SettingsExtendAdjustTimeSettingExtendAdjustTimeDescriptionSet whether to extend the image quality adjustment time when the power isturned on to improve image quality. However, pressing [On] decreases the lifeof the Drum Cartridge.• [Off] (default)• [On]178 5 Control Panel Settings
[mm / inches]System Settingsmm / inchesSettingmm / inchesDescriptionSets the unit of measure for lengths displayed or entered on the control panel.• [Millimeter(mm)] (default)• [Inches (")][Data Encryption]Important• The hard disk is initialized when the [Data Encryption] setting is changed.Note• This item appears only when HDD Extension Kit (optional) is installed.• This item is not supported on the model available in China.• All data is automatically encrypted when data is written to the hard disk.System SettingsData EncryptionData EncryptionEncryptionData EncryptionEncryption KeySettingEncryptionEncryption KeyDescriptionSets whether or not encrypt data on the system disk (hard disk).• [Off] (default)• [On]Sets the 12-digit number encryption key for encrypting data.Note• [Encryption Key] is always displayed as [0 ] on the setting screen evenwhen set as a security measure.[Overwrite HD]Note• This item appears only when HDD Extension Kit (optional) is installed.System SettingsOverwrite HDSettingOverwrite HDDescriptionSets whether or not to overwrite data on the hard disk, and the number of timesdata is overwritten.• [Off]• [1 Overwrite]• [3 Overwrites] (default)5.2 Common Menus Setting 179
Page 1 and 2:
DocuPrint C5005 dUser Guide
Page 3:
PrefaceThank you for purchasing the
Page 6 and 7:
3 Printing. . . . . . . . . . . . .
Page 8 and 9:
8 Contents7 Maintenance . . . . . .
Page 10 and 11:
Types of ManualsSetup GuideQuick Re
Page 12 and 13:
Conventions1. In this guide, person
Page 14 and 15:
Electrical SafetyThis product shall
Page 16 and 17:
OthersTo keep this product in a goo
Page 18 and 19:
Never touch the exposed connectorsa
Page 20 and 21:
EnvironmentRegulation• For enviro
Page 22 and 23:
Permission to use, copy, modify, an
Page 24 and 25:
---Portions Copyright (c) 1992-1996
Page 26 and 27:
Illegal Copies and PrintoutsCopying
Page 28 and 29:
• SMB : Used when printing using
Page 30 and 31:
1.2 Connecting a cableConnect the p
Page 32 and 33:
Network ConnectionUse 1000BASE-T (W
Page 34 and 35:
2. Open the front cover.3. Press th
Page 36 and 37:
1.4 Setting the Network Environment
Page 38 and 39:
13. Press the < > button to display
Page 40 and 41:
1.5 Enabling PortsSet all ports you
Page 42 and 43:
• Setting Up a Web BrowserWhen us
Page 44 and 45:
*1 These settings can only be set u
Page 46 and 47:
1.7 Installing a Print DriverTo pri
Page 48 and 49:
No. Name Description10 Tray 5 (Bypa
Page 50 and 51:
Inside1273456No. Name Description1
Page 52 and 53:
No. Name Description13 US 2/3 Hole
Page 54 and 55:
Control Panel1234516151413678910111
Page 56 and 57:
Control Panel DisplayThe display sh
Page 58 and 59:
• When the optional finisher is i
Page 60 and 61:
2.3 Circuit BreakerThe printer is p
Page 62 and 63:
2.4 Setting/Exiting the Energy Save
Page 64 and 65:
Checking the Status of a Print JobT
Page 66 and 67:
Message [Done] appears if the print
Page 68 and 69:
Set Printer Information Manually1.
Page 70 and 71:
3 PrintingThis chapter describes va
Page 72 and 73:
3.2 Printing on EnvelopesThis secti
Page 74 and 75:
5. Select file size in the [Origina
Page 76 and 77:
3.3 Printing on Custom Size or Long
Page 78 and 79:
2. Click the [Device Settings] tab.
Page 80 and 81:
Printing on Custom Size PaperThe fo
Page 82 and 83:
4. For [Paper Tray], select [Automa
Page 84 and 85:
3. The [Paper/Output] tab appears.F
Page 86 and 87:
8. Press the < > or button to sele
Page 88 and 89:
3. For [Job Type], select [Sample S
Page 90 and 91:
9. Enter the number of copies using
Page 92 and 93:
4. Click [Setup].The [Delayed Print
Page 94 and 95:
3.8 Private Charge PrintPrivate Cha
Page 96 and 97:
3.9 Charge PrintCharge Print is ava
Page 98 and 99:
9. Press the < > or button to sele
Page 100 and 101:
Printing PDF Files Using CentreWare
Page 102 and 103:
Sending DocuWorks Files Using Lpr C
Page 104 and 105:
E-mail Environment Settings (Printe
Page 106 and 107:
Item Setting Description AvailableS
Page 108 and 109:
Item Setting Description AvailableS
Page 110 and 111:
The [Ready to print] screen appears
Page 112 and 113:
• Paper for 2-Sided PrintingThe f
Page 114 and 115:
Semi Standard PaperIn addition to t
Page 116 and 117:
Paper NameSizeBasis Weight(gsm)Pape
Page 118 and 119:
Limited PaperYou can use the follow
Page 120 and 121:
Storing and Handling PaperPaper sto
Page 122 and 123:
3. Adjust the paper guides to the s
Page 124 and 125:
Loading paper into Trays 1 through
Page 126 and 127:
Paper Sizes/Paper Type for Trays 1
Page 128 and 129: 5. Unscrew the screw of the front g
Page 130 and 131: 5. Press the < > or button to sele
Page 132 and 133: 9. Press the < > button until the d
Page 134 and 135: Note• Bypass tray is set to [No A
Page 136 and 137: 5 Control Panel Settings5.1 Overvie
Page 138 and 139: Changing the SettingsBasic Procedur
Page 140 and 141: 5.2 Common Menus SettingThis sectio
Page 142 and 143: SettingDescription2 Sided Printing
Page 144 and 145: [XPS]Sets XPS related settings.Note
Page 146 and 147: SettingDescriptionCollated Sets whe
Page 148 and 149: SettingDescriptionPJLAdobe Protocol
Page 150 and 151: SettingConnect Time-OutTBCP FilterD
Page 152 and 153: [SMB]Network/PortSMBSMBPort StatusS
Page 154 and 155: SettingDescriptionDNSAdded PortNumb
Page 156 and 157: SettingPrint ModePJLAuto Eject Time
Page 158 and 159: SettingTBCP FilterDescriptionSets w
Page 160 and 161: SettingPort StatusDescriptionSets w
Page 162 and 163: IPv4SettingsSettingIP Address,Subne
Page 164 and 165: [EP Proxy Server]Important• This
Page 166 and 167: [Ethernet]Network/PortEthernetEther
Page 168 and 169: [SNTP Settings]Network/PortSNTP Set
Page 170 and 171: [System Settings]The [System Settin
Page 172 and 173: [Low Power Timer]Note• Refer to
Page 174 and 175: [2 Sided Report]System Settings2 Si
Page 176 and 177: [Machine Clock]Note• The date and
Page 180 and 181: [Auto Job Promote]Note• This item
Page 182 and 183: [Authentication]System SettingsAuth
Page 184 and 185: ChargePrintSettingReceiveControlPro
Page 186 and 187: [Extra Center Tray]System SettingsE
Page 188 and 189: SettingDescriptionTransferImageLog-
Page 190 and 191: [Printer Settings]The [Printer Sett
Page 192 and 193: SettingDescriptionTray 6 Sets the t
Page 194 and 195: SettingBond, Plain, PlainS2, Recycl
Page 196 and 197: [Image Quality]Printer SettingsImag
Page 198 and 199: [Custom Paper Name]Printer Settings
Page 200 and 201: [CtrTrayUp-Offset]Printer SettingsC
Page 202 and 203: [DefaultPaperSize]Printer SettingsD
Page 204 and 205: Paper size groupInch seriesLoading
Page 206 and 207: [Allocate Memory] (See *2 on P. 214
Page 208 and 209: [Image Quality]Adjusts the printer
Page 210 and 211: [Voltage Offset]Note• For more in
Page 212 and 213: [Init/Delete Data]The [Init/Delete
Page 214 and 215: [Language]SettingsLanguageSettingLa
Page 216 and 217: CAUTION• If you need to pull out
Page 218 and 219: 2. Remove the jammed paper.Note•
Page 220 and 221: Paper Jams in Tray 6 (HCF B1)The fo
Page 222 and 223: 2. Remove the jammed paper.Note•
Page 224 and 225: • If paper is jammed in the Fusin
Page 226 and 227: Paper Jams in Top Left Cover DThe f
Page 228 and 229:
Paper Jams in Duplex Module Cover B
Page 230 and 231:
• Paper Jams in the Finisher Tran
Page 232 and 233:
3. Turn the knob 1 to the left and
Page 234 and 235:
2. Move the handle 2b to the right.
Page 236 and 237:
Paper Jams at H in the Finisher1. O
Page 238 and 239:
3. Remove the jammed paper if there
Page 240 and 241:
6.2 Stapler FaultsA staple jam may
Page 242 and 243:
5. Pull up the metal part of the st
Page 244 and 245:
Staple Jams in Finisher-C1 with Boo
Page 246 and 247:
When Staple Jams occurs in Booklet
Page 248 and 249:
6.3 Hardware Problems (Power Failur
Page 250 and 251:
SymptomThe printer does not print.C
Page 252 and 253:
SymptomPrinting can be rubbed off w
Page 254 and 255:
SymptomText is garbled.Printed outp
Page 256 and 257:
5. Slowly slide the cleaning bars b
Page 258 and 259:
6.7 Error Messages and Error CodesE
Page 260 and 261:
Close Cover N(N: A, B, C or D)Close
Page 262 and 263:
Open Finisher FrontDoor and replace
Page 264 and 265:
MessagePaper JamOpen Finisher Front
Page 266 and 267:
MessageReady ReplaceFuser AssemblyS
Page 268 and 269:
MessageRemove obstructionbetween Bo
Page 270 and 271:
Error CodesError codes are six-digi
Page 272 and 273:
Error CodeCause/Remedy016-506 Image
Page 274 and 275:
Error CodeCause/Remedy016-556 Conne
Page 276 and 277:
Error CodeCause/Remedy016-721 An er
Page 278 and 279:
Page 280 and 281:
Error CodeCause/Remedy018-575 The s
Page 282 and 283:
Page 284 and 285:
Error CodeCause/Remedy026-730 The p
Page 286 and 287:
Error CodeCause/Remedy116-740 An ar
Page 288 and 289:
SymptomClicking [Apply] does not re
Page 290 and 291:
Other IPv6 ProblemsSymptomOperation
Page 292 and 293:
7 Maintenance7.1 Replacing Consumab
Page 294 and 295:
Replacing Toner CartridgesThe print
Page 296 and 297:
6. Close the front cover.Note• If
Page 298 and 299:
2. Rotate the release lever of the
Page 300 and 301:
14. Rotate the release lever clockw
Page 302 and 303:
3. Lower the cover.Note• You can
Page 304 and 305:
13. Carefully place the old waste t
Page 306 and 307:
5. Insert the front side of the new
Page 308 and 309:
4. Pinch both sides of the empty st
Page 310 and 311:
7. Return the unit to the original
Page 312 and 313:
5. Close the finisher transport cov
Page 314 and 315:
Replacing the Fusing UnitThe follow
Page 316 and 317:
Resetting the CounterAfter replacin
Page 318 and 319:
5. Remove the new IBT belt cleaner
Page 320 and 321:
3. Take out the Suction Filter R12.
Page 322 and 323:
Replacing the 200K Maintenance KitT
Page 324 and 325:
4. Take out the Paper Feed Rolls (3
Page 326 and 327:
7.2 Printing Reports/ListsThis sect
Page 328 and 329:
Report/List Name(Name on the Contro
Page 330 and 331:
7.3 Checking the Meter ReadingThe p
Page 332 and 333:
Initializing [Meter Report (Print J
Page 334 and 335:
9. Press the < > button to display
Page 336 and 337:
7.5 Monitoring/Managing the Printer
Page 338 and 339:
Item Setting DescriptionGeneral Set
Page 340 and 341:
7.7 Checking Machine Serial NumberT
Page 342 and 343:
3. On the [Configuration] tab, clic
Page 344 and 345:
Feature Description Refer toInitial
Page 346 and 347:
6. For [Source IP Mask], specify th
Page 348 and 349:
SettingWatermark / BackgroundContra
Page 350 and 351:
Print Universal Unique IDUUID is an
Page 352 and 353:
Layout Templatepreset1preset2preset
Page 354 and 355:
Outputting the Audit LogAudit Log d
Page 356 and 357:
7.10 Configuring Encryption Setting
Page 358 and 359:
Configuring HTTP Communication Encr
Page 360 and 361:
Note• If you reboot CentreWare In
Page 362 and 363:
3. On the menu on the left, click [
Page 364 and 365:
3. On the menu on the left, click [
Page 366 and 367:
Auditron Administration FeatureWhen
Page 368 and 369:
7. On the screen that appears, conf
Page 370 and 371:
3. On the [Configuration] tab, clic
Page 372 and 373:
Note• You can select multiple sma
Page 374 and 375:
Performing CalibrationPrinting a Ca
Page 376 and 377:
3. Starting from the [•] mark on
Page 378 and 379:
Inputting Density ValuesUse CentreW
Page 380 and 381:
7.13 Adjusting the Image Transfer V
Page 382 and 383:
7.14 Adjusting the Paper RegiThis e
Page 384 and 385:
384 7 Maintenance23. When the setti
Page 386 and 387:
7.16 Moving the PrinterUse the foll
Page 388 and 389:
ItemsContinuous print speed *1Descr
Page 390 and 391:
ItemsDescriptionContinuous print sp
Page 392 and 393:
ItemsDescriptionPaper TypeBypass Tr
Page 394 and 395:
Supported protocolPowerItemsDescrip
Page 396 and 397:
ItemsDescriptionWeightSpace Require
Page 398 and 399:
Left Top Tray (optional)ItemsDescri
Page 400 and 401:
European PCL • CG Times• CG Tim
Page 402 and 403:
A.3 Life of Consumables and Regular
Page 404 and 405:
A.4 Obtaining Product InformationOb
Page 406 and 407:
Memory capacity1-sidedMemory capaci
Page 408 and 409:
5. Loosen the three screws on the b
Page 410 and 411:
A.6 Installing the HDD Extension Ki
Page 412 and 413:
9. Reinsert the control board back
Page 414 and 415:
5. Loosen the three screws on the c
Page 416 and 417:
17. Press the < > or button to sel
Page 418 and 419:
3. Press the < > side of the printe
Page 420 and 421:
Refer to• List printing procedure
Page 422 and 423:
A.9 Installing the Gigabit Ethernet
Page 424 and 425:
10. Reinsert the control board back
Page 426 and 427:
6. Pull out the handle on the contr
Page 428 and 429:
5. Loosen the three screws on the c
Page 430 and 431:
A.11 Notes and RestrictionsNotes an
Page 432 and 433:
Printing from Macintosh via USB Con
Page 434 and 435:
CSRF Protection for CenterWare Inte
Page 436 and 437:
Pv6 Connection Notes and Limitation
Page 438 and 439:
The settings in the following categ
Page 440 and 441:
• From a security perspective, th
Page 442 and 443:
A.12 Glossary[10BASE-T]A 10 Mbps Et
Page 444 and 445:
[Interface]The point where two thin
Page 446 and 447:
[Resolution]Indicates the detail of
Page 448 and 449:
Demo Print . . . . . . . . . . . .
Page 450 and 451:
Registering Custom Size Paper . . .
Page 452 and 453:
Control Panel Panel Menu TreeMenu T
Page 454 and 455:
From B (previous page)([Network / P
Page 456 and 457:
DSystem Settings Alert Tone off,
Page 458 and 459:
FPrinter SettingsSubstitute Tray•
Page 460 and 461:
IImage Quality Adjust Gradation Tex
Page 462:
DocuPrint C5005 d User GuideFuji Xe
show all

Download - Fuji Xerox Printers

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?