Download - Fuji Xerox Printers

SettingWatermark / BackgroundContrastDescriptionSpecifies the contrast between the text and background for thewatermark. Contrast can be set as a value from 1 to 9.Note• Text/background contrast can be checked by printing the [WatermarkSample List].Client PrintForce PrintSpecifies whether or not watermarks are printed automatically whenprinting from a client computer.• [Off]• [On]If [Allow Device Settings to Override] is set, instruction from the client toperform Watermark or Secure Watermark features will be ignored, when[On] is specified in [Client Print] in the printer. You needTrustMarkingBasic (purchase separately) to instruct from the client toperform Watermark or Secure Watermark features.• [Allow Device Settings to Override]• [Allow Client Settings to Override]Note• The setting method applies to both the Watermark and SecureWatermark features.5. After all the settings are completed, click [Apply].Secure WatermarkImportant• Secure Watermark does not operate correctly when printing over an IPv6 network.This feature performs hidden printing of a watermark control code (digital code) on allpages. This feature protects the printed document by forcibly canceling any copy, scan, offax job attempted on a watermark secure device. Should an information leak occur, aspecial application can be used to trace when, where, and by whom an output operationwas performed.Note• For information about performing hidden printing of text strings, refer to “Watermark” (P. 347).• The Fuji Xerox ApeosWare Secure Watermark Analyzer application (purchase separately) is required toanalyze digital codes. Contact your dealer for details.1. Launch your web browser and access CentreWare Internet Services.Note• For information on how to access CentreWare Internet Services, refer to “1.6 Configuring the PrinterUsing CentreWare Internet Services” (P. 41).• If you are prompted to enter the administrator's ID and password, enter them and click [OK].2. Click the [Properties] tab.3. On the menu on the left, click [Security] > [Watermark] > [Secure Watermark].The [Secure Watermark] dialog box appears.4. Configure the settings.348 7 Maintenance